Showing posts with label San Antonio. Show all posts
Showing posts with label San Antonio. Show all posts

Sunday, November 13, 2011

The standing lamp for our "new" living room is finished. We took all the pieces and, this afternoon, put them together. I made sure to document the process (beginning with an earlier post chronicling the part where I made the different pottery components). So, here it goes.

First, our list of supplies:
A standing lamp (which we disassembled by removing the electric cord)
Pottery pieces (enough to go to the height of the decorative piece below the actual fixture), including a "cap" piece).
2" PVC pipe
Foam spray (to "set" the PVC pipe against the metal pole of the lamp).
Silicone (to attach and anchor the separate pottery pieces to each other).
A replacement plug (since we had to remove the old one to remove the wire so we could put the whole thing together -- a long story).

We took the PVC pipe and loaded the pottery pieces onto it. I'd already checked the height of the pieces against the lamp and, being really, REALLY lucky, they were the perfect height.


At this stage, everything was just sitting one on the other, so we could make adjustments and figure things out. We decided to switch the order of the pottery a little, switching around the bottom piece with the blue piece (fourth from the bottom).

Then we marked the PVC pipe where it needed to be cut and took everything apart again.

Then Avie, my favorite husband and incredible handyman, took the PVC pipe outside to cut. He cut it 1/4" below our marked line.

Then we brought it back in and put it on the lamp. At the top, we sprayed in some insulating foam sealant so the PVC pipe would be fixed in place. We only needed to do this at the top, since the bottom sat squarely around a "hump" from the lamp base, holding that part quite nicely. Then we allowed the foam to set for a few minutes.



The wire you see sticking up through the center is the guide wire we were going to use to pull the original electric cord back down through the lamp. We had to do this because you can't drop pottery pieces down with everything attached. We didn't think about this until we started looking at everything after we purchased this lamp at the Salvation Army.

When the foam had set up a little, we began loading on the pottery, putting a line of silicone where they joined the PVC and each other, to keep them secure and to prevent them from shifting.


Finally, we had all the pieces loaded.



When the insulating foam dries, it also expands. Avie trimmed the foam so it wouldn't block the threads where we would be screwing the lamp back together.

Then it was time to pull the electrical cord back through. He threaded the guide wire through the cord and gently used it to guide everything back through the bottom two holes of the lamp. It worked like a charm except, in the excitement, we'd forgotten to put the pottery finishing cap on. So, the first time was for practice. We put everything back the way it was, put on the cap, and rewired the lamp a second time.




Then it was just a matter of attaching the cap piece, attaching the new plug, screwing in the top, and making sure everything worked.

It did!
 
All in all, it was a fabulous experience resulting in a tremendous sense of pride AND a fabulous piece for the formal living room.

Let me know what YOU think!

Friday, August 13, 2010

Well, true to my predictions, I've become underglaze crazy. In fact, I'm trying to switch from my Mason Stains in slip to Amaco Velvet Underglazes for most of my work calling for that type of application. But this switch has not been without its issues.

For one thing, I still get some fading with many of the colors. I've now printed out a color variations chart for them, indicating what they will do  at cone 5 glazed and unglazed (and cone 10, though I don't think I'll see cone 10 for quite a while).

Another issue I'm having is watching the colors fade away under my clear glaze overcoat. I think I'm going to try thinning the glaze a bit before applying it. The thickness creates a milkiness, obscuring the color beneath.

Finally, I've had the underglaze run under the clear glaze on a vertical surface. This is NOT a good thing, considering most of my work is vertical (mugs). Again, I think it's a function of the thickness of the applied clear glaze. I've applied a thinner coat on my latest mugs. We'll see what happens.

Meanwhile, let me share one of my successes -- since not everything is doom and gloom. The following is an Apples and Honey set for the Jewish New Year (Rosh Hashana), coming up the evening of Sept. 8, 2010. We eat apples dipped in honey to symbolize our wish for a sweet year.

Friday, October 02, 2009

Sadly, I lost my mother to lung cancer on Sept. 11. It was an intense summer and I'm now trying to slowly reboot my life.

One of the best things has been my return to work in the studio. I quickly got a commission from a previous customer when I reopened my etsy shop. She wanted a platter to match the tree of life Kiddush Cup (goblet) she bought from me a while back. It was the perfect challenge to get my creative juices flowing.

I handbuilt the platter and then added four "trees" made of slip around the rim.

So far so good. Hopes up that it successfully makes it through the bisque firing! I'll be sure to post photos when it's done.

In the world of the more mundane, I'm considering starting a monthly get together at my house called "Pottery Friday". Because of my schedule, it would take place at brunch time. I'd just have an open house for local potters to drop by and bring their food. I'd supply coffee and tea and the place to meet. Then we could just discuss our work, life, and the universe.

Of course, ideas need to become reality. I'm going to let the thought grow a bit in my head. Then I'll figure out a way to implement it.

Friday, June 19, 2009

It's been a while since I've been able to post. Actually, it's been a while since I've been able to do anything that requires dedicating time to myself.

One of the biggest reasons for this has been my mother, who probably has lung cancer, but whose struggles with the mazes of health insurance has delayed adequate testing for a definitive diagnosis.

But this is a pottery blog -- not a political/health issues one.

I did get back into the studio for a couple of days last week and worked on some pierced goblets and an "upside down bowl" teapot. I've enjoyed the teapot's progress and am making it a bit funky, with a sideways handle and a small lug handle in the back to facilitate pouring, since it promises to be a rather heavy item. I'm not sure all my proportions are right -- but I'll only know this once it's fired and the handle has been attached.

I keep meaning to bring a camera to the studio to do a photographic tutorial on my sgraffito techniques. But that, obviously hasn't happened yet. Maybe someday.

Meanwhile, I'm anticipating getting back into the studio more regularly to work on something other than mugs. Anticipation....... (is that Carly Simon in the background?)

Tuesday, February 24, 2009

The first weekend in May is San Antonio's Empty Bowls sale. As potters know, that isn't too far away when we're talking about our craft.

For those of you who aren't aware of what Empty Bowls is, the following is an explanation and history lifted from the San Antonio Potters' Guild website:

Empty Bowls is an international effort to raise funds for charities that support the hungry and homeless. It began in 1990 when a Michigan high school students and their teacher wanted to find a way to raise funds to support a food drive. Just one year later the concept developed into Empty Bowls and since that time the 501 (c) 3 organization has raised millions of dollars to combat hunger. (For more information about the effort visit www.emptybowls.net.) There are Empty Bowls events staged by ceramic artists all over Texas and the nation.

Since I've hit a bit of a dead end with my current creative status, I think I'll be spending the rest of the week throwing bowls for this. This offers me several happy advantages:
1. I'll be doing some good
2. I'll be able to use studio clay (free), allowing me to experiment with different forms and glazes a bit more freely
3. It might just give me some inspiration, something that seems to be in short supply right now.

I think the shift from mugs and Judaica to lovely bowls with interesting feet might be just what's needed right now! As Mary Engelbreit says, "Life is just a chair of bowlies."

My advice to y'all? Find out when your area is holding an Empty Bowls event. Donate bowls, purchase bowls, eat soup, help the homeless. It's all good!