Showing posts with label glazing. Show all posts
Showing posts with label glazing. Show all posts

Tuesday, October 18, 2011

Time for an update on the standing lamp.

All the pieces have been through both the bisque firing, been glazed with "Hi Fire Clear" and fired up to cone 5. I brought them home, all excited about putting the lamp together this evening. Here are the pieces lined up on our coffee table:

Then we hit our first glitch. I knew we would be able to unscrew the lamp pole from the base; but I completely forgot about the cord! And, this being a very commercial lamp (purchased used, but made in China), detaching the cord from anything proved to be more difficult than I thought.

When Avi (my husband) came home, we unscrewed the bulb housing, only to see the wires were permanently embedded in it. No unscrewing wires here.

For a bit, I pondered creating this as a non-functional piece of art. But Avi loves a good puzzle. In the end, we decided to cut off the plug, pull the wire out from the top, with a lead wire attached to help guide it back through when we're done putting everything together. The wire is out, with the lead wire still in place in the tube. It will be reattached to the power wire and pulled back down through when we're done with everything else. Then we'll just attach a new plug. I'm sure this is all clear as mud. At least Avi and I understand what we're doing.

Then we had fun trying to decide where each section would look best on the lamp. This was what we've come up with:
I've decided I need to make a "cap" to top off the stack and make it fit the top piece of the lamp more snugly. I wouldn't want to just leave a gaping hole at the top. I'll work on that tomorrow. I'm planning on making one concave and one convex, then deciding which I like best when they're done.
So, there'll be another lapse in time from now until the next post. Stay tuned for the next installment.

Friday, August 13, 2010

Well, true to my predictions, I've become underglaze crazy. In fact, I'm trying to switch from my Mason Stains in slip to Amaco Velvet Underglazes for most of my work calling for that type of application. But this switch has not been without its issues.

For one thing, I still get some fading with many of the colors. I've now printed out a color variations chart for them, indicating what they will do  at cone 5 glazed and unglazed (and cone 10, though I don't think I'll see cone 10 for quite a while).

Another issue I'm having is watching the colors fade away under my clear glaze overcoat. I think I'm going to try thinning the glaze a bit before applying it. The thickness creates a milkiness, obscuring the color beneath.

Finally, I've had the underglaze run under the clear glaze on a vertical surface. This is NOT a good thing, considering most of my work is vertical (mugs). Again, I think it's a function of the thickness of the applied clear glaze. I've applied a thinner coat on my latest mugs. We'll see what happens.

Meanwhile, let me share one of my successes -- since not everything is doom and gloom. The following is an Apples and Honey set for the Jewish New Year (Rosh Hashana), coming up the evening of Sept. 8, 2010. We eat apples dipped in honey to symbolize our wish for a sweet year.

Wednesday, January 27, 2010

I thought I'd take a few minutes to explain why I decided to go with colored underglazes rather than majolica glazes.

The first reason is movement. In my experience, underglazes and colored slips (both contain clay) tend to adhere better to surfaces. I've had no experiences with it running under a final coat of clear glaze. This gives me sharper lines in my carving.

Secondly, I want strong, intense colors in my upcoming prototypes and projects. Something like this by Sharon Bloom:


The following is a wonderful majolica piece by Judy B. Freeman. As opposed to underglazes, majolica is glaze -- much more closely related to glass than underglaze. As such, it has a softer, more watercolory feel to the coloration, which definitely works on this piece, but which I don't think I could pull off with the designs I have from David:


Of course, as this life tends to work, I'm sure there will come a time when I decide I've had enough of underglazes and get brave enough to start working in the world of majolica.

Yesterday I threw a couple of plates to work on. I'm hoping to get them trimmed out today. Then, when my anticipated delivery of underglazes comes tomorrow, I can get to work on them next week.

Friday, February 20, 2009



Remember I was talking about blue slip? Well, the pieces finally came out of the kiln and looked great.

Sadly, another piece (a wedding gift) also came out of the kiln looking lousy.

Can you tell which is which??? I'm SURE you CAN!

Sunday, January 18, 2009

It's been a great week in the studio with sgraffito (carving through colored liquid clay to reveal the lighter clay beneath) galore.

In addition to aba (father), ima (mother), saba (grandpa) and savta (grandma) mugs, I took some of David's animal sketches, along with a stencil, and made three whimsical mugs. There was one I love so much it might well wind up in my cabinet for coffee, rather than in the etsy shop.

Of course, with sgraffito, the great consideration is glazing. Which glaze will show the carving, without being boring. I've been leaning toward clear glaze on the outside, with brighter colors lining the interior of the mug. As someone who's always loved contrast: color/black and white, matte/gloss, etc., this is a compatible voice for my designs. However, I'm in love with a lovely transparent cone 6 glaze called oribe (quite different from the cone 10 version). So I glazed a couple of the mugs with it.

They're out of the kiln. But I haven't had a chance to go over to the studio to see them, since someone else unloaded this firing. Tuesday is going to be fun!

Friday, November 07, 2008




Aaargh! The bowl was beautifully shaped and the wheel process went without a hitch. The trimming was done at that perfect point of leather -- when the clay comes off in beautiful ribbons. Then the feet were sooo pretty.

But the glazing!! I couldn't get the outside glaze (Electric Blue) to adhere properly. I knew I was being lazy when I put it on the glaze firing shelf. I should have taken the extra time to clean off the outside and redo it properly. But I hoped against hope that doctoring the dry glaze by rubbing it gently so the crack lines disappeared would work. It didn't.

Moral of the story -- NEVER be lazy with your ceramic pieces.

At least I have a nice bowl for when I eat my popcorn while watching tv...........