Showing posts with label underglaze. Show all posts
Showing posts with label underglaze. Show all posts

Thursday, September 29, 2011

You've seen the home side of the new living room project. Now I'll show you what's happening in the studio.

As I said in the previous post, I'm working on making a standing lamp from ceramics. The idea is to throw the lamp in sections. My forms are made so the bottom opening will sit just over the rim of the top opening, locking the pieces in place. They're thrown to fit around a two inch pvc (plastic plumbing) pipe, which will sit over the base lamp, pictured in the previous post. They won't sit right up against the pvc pipe. But there will be about a quarter to a half inch clearance between. Hopefully this will all be enough to keep the lamp stable. I'm assuming it won't be moved much and this will all work well.

So, the following photo is of some of the pieces thrown on the first day. I worked with 3-4 pounds of clay per piece, leaving a fairly thick wall for stability and strength.


I wanted the lamp to be colorful, but not enough to dominate the room. So, I decided to use underglazes and have one color family per piece. The base coat would be a light shade of the chosen color, after which I would sponge paint a darker shade over it to create some sort of pattern. Each piece would have a different pattern. There will probably be two pieces for each color family: red, purple, green, brown, blue. A few of the finished underglazed pieces are below:


I have about one more day's work before the pieces have all been underglazed and touched up. Stay tuned......

Friday, July 01, 2011

Last night I did a workshop in our studio on layered underglaze/colored slip surface decoration. It's a technique I learned when I attended The Surface Decoration workshop through the Potter's Guild in Temple, TX a couple of months ago.

I've been playing with the technique all week and have become incredibly inspired by the process. I'll walk you through the workshop so you might become inspired as well.

Here's the initial setup for the workshop. From the left side: slab prepared for platter demo, tile prepped for technique demo, sample stencils/sample patterns/heat wire, plaster molds, samples of finished pieces using technique. Please ignore the soft drink in the photo. It's not mine.






This is the stencil I used for the platter. It's adapted from a Judaica papercut. Papercuts are, for all intents and purposes, stencils. After sizing it correctly, using Picasa software, I traced it onto my .010 Lexan and cut it using a stencil heat wire. I'd say the stencil took me about two hours total, from printing to finished piece.

First I did a demo on a tile I had prepped earlier. (Everyone had two tiles to play with -- everyone only had time enough to complete one.) The prep involved painting black underglaze on the surface of the tile and allowing it to dry to matte consistency, while keeping the tile itself moist and pliable.
 I began by carving a series of angled lines as a backdrop. The lines will fire the color of the clay which, in this case, is low fire white.


You could just as easily make swirls, geometric patterns, or not carve at all. But the technique is about layers, so I carved.

 Being a little bit OCD in the studio, I used a ruler for my lines.

Then I took a stencil (a commercial one in this case) and used a rolling pin to embed it into the clay. 

The idea is you want the clay to come up so its surface is level with the top of the stencil. This will prevent your underglaze or slip from bleeding, giving you a crisp, clear image.







Because I used a black foundation color, which muddies overlying colors, I put a base coat of white underglaze. This acts the same way a primer does, helping your lighter colors pop. If you're going from light base to dark, this step is probably not necessary.


Then we had to "hurry up and wait" for this base layer to dry to matte. When the tiles are done, and dry enough, they'll be placed on a plaster slab and rolled over, to flatten the design side. It's important to compress the layers, leaving a smooth surface. This decreases your chances of cracking along stress lines created by carving and raising clay through the stencil/s.


At this point I had everyone base coat their tiles with the color of their choice.

While all the tiles dried I moved onto the platter demo .


Remember the stencil in an earlier photo? I used it for this platter. Since the stencil would block the pattern, I used Fossil Gray Amaco Velvet underglaze, which would give me a stonelike effect. It's fires gray with tiny black spots. 


When that dried to matte, I rolled on my stencil and used Medium Blue over it. This was the result when I peeled off the stencil.









I placed my "Shabbat" (in Hebrew, since I do Judaica) stencil over the centerpiece of the slab, trying to center it correctly.


Then, just as on the tile, I used a roller to fix it into place, again making sure the clay came up level with the top of the stencil.







Using black underglaze, I painted on a couple of coats and waited for it to set.


It doesn't need to dry completely before removing the stencil. It just needs to set enough so it won't smear.









Here it is, with the stencil removed.













Throughout the process, it's important to make sure your slab remains pliable. I do this by spraying plastic and laying the slab over that. Then, periodically, I pick up the slab and spray some more. Since the slab is about 1/2" thick, this keeps the clay pliable, while still allowing the surface colors to dry.








Once my underglazes have dried so they're no longer tacky to the touch, I cut out my platter.












                                                                             


Now let's backtrack a couple of steps. While I was waiting for my underglazes to dry, I took a plaster hump mold and centered it on a foam bat. I'll be using this to shape my platter.

Here I've begun shaping the slab against the mold using a rubber rib. You could just as easily use a wooden one. The idea is initially to use lighter pressure, molding the clay to the shape of the mold.

I slowly increased pressure on the clay, both compressing the piece and trying to flatten out the textured layers from the carvings and the raised stencil parts. This is to prevent cracking from multiple sources: not enough compression of the slab (especially on a larger piece), stress from the carvings and raised lines from the stencil. This also gives a nice, smooth surface to the inside of the functional piece.

Compress, compress, compress.........

When I feel I've finished compressing, I take a serrated rib and score the bottom where I want to place my foot. I do this while the wheel is moving, making it simple to be sure the foot will be centered. The step missing here is that I trimmed the rim of the platter with the pointed tip of a sculpting stick. Then I used a damp sponge to smooth off the sharp edge. Then I just trimmed up a little along the inside. I smooth that off when the platter is removed from the mold.


     


Then I put slip over the scoring. I'm using slip made from my clay body with water and a little vinegar to act as a flocculant.

I've made a coil using a handle cutter. You could just as easily roll one or use an extruder. I've scored the coil, slipped it, and joined it to the bottom of my platter.

I laid the ends of the coil one over the other and make an angular cut through both, to create a joining edge. I set the wheel to spin and work with the foot, centering it and bringing clay down to join it seamlessly to the body of the platter. I work on this a bit, making sure the foot is compressed, centered, and well joined.

Here's a photo of the finished platter (note the cleaned up edge), and a bit of the tile with Amethyst having been painted over the white base.







 The technique has all sorts of possibilities. I encouraged my students to play with it, telling them I'd love to see where they take it and how they make it their own.

Friday, August 13, 2010

Well, true to my predictions, I've become underglaze crazy. In fact, I'm trying to switch from my Mason Stains in slip to Amaco Velvet Underglazes for most of my work calling for that type of application. But this switch has not been without its issues.

For one thing, I still get some fading with many of the colors. I've now printed out a color variations chart for them, indicating what they will do  at cone 5 glazed and unglazed (and cone 10, though I don't think I'll see cone 10 for quite a while).

Another issue I'm having is watching the colors fade away under my clear glaze overcoat. I think I'm going to try thinning the glaze a bit before applying it. The thickness creates a milkiness, obscuring the color beneath.

Finally, I've had the underglaze run under the clear glaze on a vertical surface. This is NOT a good thing, considering most of my work is vertical (mugs). Again, I think it's a function of the thickness of the applied clear glaze. I've applied a thinner coat on my latest mugs. We'll see what happens.

Meanwhile, let me share one of my successes -- since not everything is doom and gloom. The following is an Apples and Honey set for the Jewish New Year (Rosh Hashana), coming up the evening of Sept. 8, 2010. We eat apples dipped in honey to symbolize our wish for a sweet year.

Sunday, February 21, 2010

I've been promising a demo and I needed to remake the baby gift that blew up in the kiln, so I took the opportunity to combine the two. So, these are the deep dark secrets of my upcoming custom baby plate series using the wonderful art of my good friend David Kaminsky.

I begin with a plate that has dried to almost leather, meaning it's no longer tacky to the touch, but still has a decent amount of give in its softness.

I print out a scanned copy of the art I'm using, sizing it to the area I need to cover. Then, because making an impression of this size using the paper leaves remnants of said paper on the damp clay, I trace the pattern onto a piece of plastic wrap using a permanent marker. I then use this to gently incise the pattern onto my plate.



Once the pattern is completely incised, I grab my Amaco Velvet Underglazes and consider my color options.

 

Then I just start painting. I use a few different brushes, all natural fiber. 

I don't worry too much about the details. These can be cleaned up later when the underglazes have dried, but the clay is still moist. For the most intense color I use three coats of each color. Because I'm anal, I only work with one color at a time, allowing each coat to dry in between. The clay tends to absorb a lot of the moisture, so three coats usually doesn't take very long.

For the sky background, because I don't want the plate to be overpowering, I use a "wash" coat of the underglaze rather than the intensity three coats would offer. This is done with a quick single coat.

Then it's time to add the name. I know -- I could have just done it on the same plastic I used for the main picture. But the letters are more delicate and I prefer using the heavier quality of paper for this and, since the paper doesn't sit on the clay for long when incising the name, I don't get any paper fibers stuck to the clay.



Finally, I fill in the letters for the name, use my incising tool to accent the definition lines, clean up any small smudges, and the initial work on the baby plate is done. It will go in for a bisque firing, which will bring out the stronger shades of the underglaze though, unlike regular glaze, they won't change too much from what you see here.



To be continued.........

Wednesday, January 27, 2010

I thought I'd take a few minutes to explain why I decided to go with colored underglazes rather than majolica glazes.

The first reason is movement. In my experience, underglazes and colored slips (both contain clay) tend to adhere better to surfaces. I've had no experiences with it running under a final coat of clear glaze. This gives me sharper lines in my carving.

Secondly, I want strong, intense colors in my upcoming prototypes and projects. Something like this by Sharon Bloom:


The following is a wonderful majolica piece by Judy B. Freeman. As opposed to underglazes, majolica is glaze -- much more closely related to glass than underglaze. As such, it has a softer, more watercolory feel to the coloration, which definitely works on this piece, but which I don't think I could pull off with the designs I have from David:


Of course, as this life tends to work, I'm sure there will come a time when I decide I've had enough of underglazes and get brave enough to start working in the world of majolica.

Yesterday I threw a couple of plates to work on. I'm hoping to get them trimmed out today. Then, when my anticipated delivery of underglazes comes tomorrow, I can get to work on them next week.

Tuesday, January 26, 2010

I'm moving into a new world and that world contains Amaco Velvet Underglazes.

"Why?" you may ask.

I recently completed a weddding kiddush cup commission. The customer wanted it in Northwestern University purple, which is a rather intense color -- one I knew I couldn't achieve using Mason stains in slip. So, I broke down, asked around, and came up with Amaco's Amethyst underglaze.

The kiddush cup came out wonderfully!


Tied in with that was the receipt of new drawings by my artist friend David. Several of them are adorable imaginary animals that would be absolutely perfect on a baby name plate (in Hebrew, of course). But they just wouldn't look right carved through a single color of slip, which has been my hallmark technique up 'til now.

So, when I put the two events together, it helps make up my mind to try using strong pastel underglazes on my soon-to-be-made baby name plates. Since shipping info shows my underglazes are due to come on the 28th, I think I'll throw a couple of plates today so they're trimmed and ready to decorate early next week.

Meanwhile, I'm also working on a rather large plate that's a commission piece, with the tree of life around the rim and encroaching on the center, with the words Tikkun Olam in bark textured sprigs in the center of the piece. The customer wants lots of color on the plate -- but I think I'll leave the various colors on the individual letters, add brown on the tree, and I'll decide on the background once it's been bisque fired and I can get a better feel for what the finished plate might look like.